Gold leaf is often thought too delicate for the outside of a building. In fact genuine gold does not corrode or tarnish, which is why theatre lettering, clock hands and royal arms are gilded rather than painted gold. Gilding outdoors lasts as long as the work underneath it, and most of the skill goes into that.

Does gold leaf tarnish outdoors?

No. High-carat gold, and we use 23.5 carat outside, contains almost no base metal, so it does not tarnish. What fails on external gilding is the ground beneath the leaf, the size that holds it, or a surface that moves or lets water in. Gold follows every fault in the surface it is laid on.

All outdoor gilding is oil gilding. The leaf is laid on an oil size once the size reaches the right tack, and how long that takes depends on the temperature and the damp in the air. On a building the gilder has to judge the size against the weather as well as the surface.

At Fishmongers’ Hall in 2021 we gilded the bronze sword and mirror on the stone façade and the incised inscription, ANNO DOMINI MDCCCXXXIII. The old paint was rubbed back and the surfaces primed, given a yellow enamel ground, then sized and gilded twice in 23.5 carat gold: transfer leaf for the first gild and the awkward faces, loose leaf for the second and for the lettering. A second gild covers any gaps left by the first. We worked only in fine weather, from a scaffold tented against the rain.

Lettering and detail seen from the street

At the Theatre Royal, Drury Lane, in 2020, the work was the lettering, the royal crest and four column capitals on Catherine Street, from the main contractor’s scaffold. We traced and measured the existing letters in place, and the tracings were redrawn at the office into templates, so the new lettering kept the size and spacing of the old. The capitals were repainted in Regency Red with their frieze mouldings gilded, and the crest was redecorated in heraldic colours and gold on a bench in our studio.

At Tiffany & Co on Old Bond Street in 2019 the façade gilding, including the clock and its bracket, was reinstated like for like from photographs and the elevations, in 23.5 carat transfer, loose and ribbon gold, worked from a lift and a cantilever scaffold over the pavement.

What makes outdoor gilding last?

Preparation comes first. The ground must be sound, sealed and primed before any size goes on, because gilding laid over flaking paint or rust will lift with it. Then the size and the weather: the leaf has to go on at the right tack, in dry conditions, and the work needs protecting until the size has cured. Last, some objects need protection after gilding. The Astronomical Clock at Hampton Court Palace, made in 1540, has painted and gilded copper dials facing into Clock Court. In May 2017 we cleaned them for Historic Royal Palaces and applied a UV-resistant varnish to slow further weathering.

Well-prepared external gilding in 23.5 carat gold can last for decades with occasional cleaning. If you have lettering, a clock or a gate that has dulled or lifted, call or email us to arrange a visit, or send photographs. There is more on Exterior Gilding.