When gilding is specified or priced, the first questions are usually about the gold: which carat, real or imitation, how many books. They matter, but the gold is rarely where the main decisions or the main cost lie. This is a short guide to the choices, for architects and owners.

Carat

Genuine gold leaf comes in a range of carats. The higher the carat, the less silver or copper in it, the warmer the colour and the less it can tarnish. Lower-carat leaf is paler or cooler and may tarnish, especially outdoors.

For most architectural and external work we use 23.5 carat gold. It is close to pure and does not tarnish outside, which is why we used it on the Russell Street lettering at the Theatre Royal, Drury Lane, on the armorial panels above the stage in the Speech Room at Harrow School and on the façade of Tiffany & Co on Old Bond Street. Where a scheme wants a paler gold, a different carat can be chosen, but that is a decision about colour, best made against a sample in the room’s own light.

Imitation leaf, a brass alloy often called Dutch metal, costs much less. It suits short-life or low-level decorative work, and it needs varnishing so it does not tarnish. For work that has to last, and for anything outdoors, we recommend genuine gold.

Loose leaf and transfer leaf

Gold leaf comes in two forms. Loose leaf lies free between the pages of the book and is cut on a gilder’s cushion and lifted with a tip. It goes into deep and detailed mouldings and is the form used for burnished water gilding. Transfer leaf is pressed lightly onto tissue, so it can be laid like a sheet, which makes it steadier in a draught or outdoors. On a large job we use both. At Fishmongers’ Hall in 2024 the entrance hall and corridor took more than a thousand books of 23.5 carat gold, laid loose and as transfer leaf as each moulding required.

What is double gold?

Double gold, or double-thickness leaf, is a heavier leaf. It costs more per book and covers better, and we use it where wear or weather is a factor: on exteriors, and on surfaces in busy interiors that people pass close to every day. The entrance hall and corridor at Fishmongers’ were gilded in double gold for that reason.

Where the cost goes

On most gilding jobs the largest cost is not the gold but the labour around it.

Preparation comes first. The surface has to be sound and correctly sealed and sized before any leaf is laid, and on enriched plasterwork that can mean rubbing down every moulding by hand. At Fishmongers’ the enrichments were rubbed down egg by egg and dart by dart before any gold went on.

Then access: scaffold, towers or a powered lift to reach a cornice or a façade safely. Then time. Gilding goes best without interruption, so on a busy building it may need weekend or out-of-hours shifts; at Fishmongers’ the gilders worked Saturdays.

On historic work there is also toning. New gold is brighter than old, and a repair has to be toned back to match the surrounding gilding. In a Grade I house in London we regilded leak-damaged coffers and toned the new leaf to the old so the repair could not be picked out. That can take longer than gilding from bare ground, and it barely changes the number of books used.

So when a gilded scheme is being specified or compared, ask how much preparation the surface needs, how it will be reached, and how new gold will be matched to old, as well as which carat. For a price, call or email us to arrange a visit, or send photographs and drawings.